1. Routine Maintenance & Precision Tune-Ups
Your motorcycle or scooter receives a detailed service following manufacturer-recommended intervals, ensuring longevity and peak performance.
We begin by changing engine oil and filter using the correct grade as per OEM specifications—synthetic or semi-synthetic options available.
Brake fluids, coolant, and clutch fluids are inspected and replaced with high-quality fluids to maintain hydraulic consistency and prevent corrosion.
Valve clearances are measured with feeler gauges and adjusted precisely to manufacturer tolerances, optimizing engine efficiency and reducing noise.
Our technicians perform a sympathetic chain adjustment and lubrication, ensuring smooth power transfer and extending sprocket lifespan.
Lastly, we conduct a dyno run to verify power output, throttle response, and overall engine health—logging performance metrics in your digital report.
2. Engine Diagnostics, Repairs & Overhauls
State-of-the-art OBD-II and CAN-bus scanners diagnose fault codes in fuel-injected systems, identifying issues with sensors, injectors, or ignition modules.
Compression tests and leak-down measurements pinpoint cylinder seal integrity, guiding piston-ring replacements or full engine rebuilds as needed.
Piston, ring, and cylinder bore wear are measured using micrometers to determine whether honing, sleeving, or piston swaps are required.
Cylinder head inspections reveal valve-seat seating quality, guiding precise valve grinding, guide replacement, or reseating for optimal compression.
Crankshaft end play and bearing clearances are verified to prevent unexpected failures, with any worn components replaced using genuine bearings.
Post-rebuild, the engine is rebalanced on our in-house dyno, ensuring smooth idling, consistent power delivery, and peak torque performance.
3. Electrical Systems & Diagnostic Overhauls
We trace complex wiring harnesses using advanced circuit testers to locate shorts, open circuits, or poor grounds in modern EFI and CDI systems.
Battery health is assessed via conductance testing; failing batteries are replaced with high-output AGM or lithium-ion options for superior cold-cranking.
Alternator and stator outputs are measured under load to confirm charging system reliability, preventing unexpected battery drain.
We install and calibrate aftermarket LED lighting kits, auxiliary driving lights, USB power ports, and GPS navigation mounts, ensuring safe integration.
Faulty starter relays, solenoids, and ignition coils are replaced with OEM-quality units, restoring reliable cold starts and eliminating misfires.
After all electrical work, we run a comprehensive system check using diagnostics software to verify ECU updates, map calibrations, and fault-code clearances.
4. Suspension Tuning, Fork Rebuilds & Chassis Alignment
Your bike’s suspension dynamics are fine-tuned to match rider weight, riding style, and typical road conditions—crucial for comfort and handling.
Front forks undergo full disassembly: seals replaced, bushings reamed, and internal damping components inspected, then reassembled with fresh fork oil.
Rear shocks are tested on our suspension dyno; worn damping cartridges or leaking seals are replaced, and spring preload is adjusted to OEM specs.
Chassis alignment is performed on laser-guided alignment racks, ensuring precise steering geometry and eliminating handling wobbles.
Wheel bearings and swingarm pivot bearings are inspected for play and replaced with sealed units to maintain smooth operation and extend component life.
A final road test captures real-time feedback on suspension response, allowing micro-adjustments for the ideal balance between comfort and control.
5. Brake System Overhauls & Performance Upgrades
We conduct multi-point inspections, measuring pad thickness, rotor run-out, and hydraulic-line integrity to determine service needs.
Calipers are dismantled; pistons, seals, and guide pins replaced with high-temperature, OEM-grade components to ensure consistent braking force.
Brake rotors are resurfaced or replaced based on run-out measurements; floating rotors have their float buttons replaced for improved heat dissipation.
Upgrade options include stainless-steel braided brake lines for superior lever feel and EBC or Brembo performance brake pads tailored to street or track use.
Brake-fluid flushes use DOT 4 or DOT 5.1 synthetic fluids, providing higher boiling points and reducing fade during aggressive riding.
After reassembly, each brake system is bled with a vacuum pump and pressure-tested, delivering solid lever feedback and reliable stopping power.
6. Mobile Roadside Assistance & Emergency Breakdown Support
Our fleet of fully equipped service vans operates 24/7 across major cities—Delhi, Mumbai, Bangalore, Chennai, and Kolkata—ensuring prompt roadside support.
Technicians arrive with portable dyno-tuning rigs, battery jump-starters, tyre-inflation units, and a stock of common spares—spark plugs, filters, bulbs, and brake pads.
Flat-tyre changes, minor clutch adjustments, chain repairs, and battery replacements are typically completed on the first visit, avoiding towing costs.
For complex issues requiring workshop attention—engine failures or major electrical faults—our team coordinates secure towing to the nearest MotoGarage facility.
GPS-enabled tracking of mobile units provides real-time ETA updates, keeping you informed and minimizing downtime when you’re stranded.
Our holistic roadside service ensures you’re never left alone on unfamiliar roads; help is just a click or call away, day or night.